Laboratory Hoods

Flow Sciences Safety Hood 

• Class II Type A / B3
• 6 ft Wide
• New HEPA Filters

K. Leister- CH Kagiswil Centrifugal Blower. 220-254v, 100 mm discharge size, 2.75 inch suction size. 4700 lpm.

Flow Sciences FS4500 Dual Stacked HEPA Vented Balance Enclosure Accessory. The FS4500 dual stage filter housing is used when both particulates and odor abatement is required and house exhaust is not available in the facility. The FS4500 uses both a HEPA and Carbon filter to completely filter air and safely recirculate back into the room. Internal fan, 110-120v, 60 Hz. With pressure gauge used to determine when filter change is necessary.

Flow Sciences FS-4510 Dual Stacked Fan and Filter

Accessory. The FS4510 dual stage filter housing is used when both particulates and odor abatement is required and house exhaust is not available in the facility. The FS4510 uses both a HEPA and Carbon filter to completely filter air and safely recirculate back into the room. Internal fan, 110-120v, 60 Hz.

Manufacture by Flow Sciences FS4510 Dual Stacked HEPA Filtration Housing Unit. The FS4510 dual stacked filtration is used when both particulates and odor abatement is required and house exhaust is not available in the facility. The FS4510 uses both a HEPA and Carbon filter to filter air and safely recirculate back into the room. Internal fan, 110-120v, 60 Hz.

The NuAire AireGard Energy Saver NU-201 Table Top Horizontal Airflow Workstation is designed for work areas that need clean air. Built with an energy-saving motor/blower, the NU-201-630 has a 6-ft. cabinet. Work area dimensions in inches, 70 w x 27.5 h x 19 d.

Stainless Steel Hood Enclosure.  Custom Made.  Opening  2 sides 36"W x 40"H  with 3 sliding doors.  Outside dimensions; 37.5 w x 42.5 d x 52 h.  With 8" diameter vent pipe. Inside dimensions; 31.5 w x 35 d x 39.5 h. With stainless steel base removable  tray.  Very clean.  Has small port holes used to to fit Swagelock fittings for feed through piping  and other small minor ports. Unit strut brackets are mounted on the inside to support equipment on the side of the unit. 

ThermoFisher Scientific Shandon Hyperclean 2 Fume Hood Model 9990602 * Full-height front doors provide easy access to equipment * Sides may be removed and replaced for easy access * Sides and front are made from clear acrylic, which is impervious to most chemicals * Filters are replaced easily without tools Ordering Alerts: *Dimensions (H x W x D): 44.1 x 35 x 32 in. (112 x 88.9 x 81.3cm) *Height without blower: 34.5 in. (87.63cm) *Weight: 74.8 kg (165 lbs.) *Power Information: 110-120V, 1.1 amp, 60 Hz, 1 Ph *Certifications: UL/cUL (110-120V only); CE (220-240V only)

Nuaire Hood Exterior Dimension: 34.5" x 30" x 63" WDH, Interior Dimensions: 34.5" x 26" x 20" WDH. With Pho, nix controls linearized venturi valve

Flow Science FS400 fan blower/hood filter housing   

Flow Science FS400 fan blower/hood filter housing   

Labconco Tissue Culture Enclosure Model 51000-00

• Two lights UV and standard Fluorescent
• Outside 45" Length x 24" Depth x 21" Height
  
• Non Vented Model
• Both Bulbs work
  

Regeneair Regenerative Blower for chemical and safety enclosures and hood 

Bosh Rexroth Aluminum Structural Enclosure

Airline Hydraulics Custom Design Enclosure with Bosh Rexroth Aluminum Structural Framing and Clear Polycarbonate Pannels. Size: 40" H x 17" FB x 26" W. Front: 2 doors. vent port on top and bottom back.

Airfiltronix small scale Fume Extractor HS3000A

Airfiltronix Portable Fume/Particle Hood with Filter, Can accommodate a variety of filters, With Blower, 5" Tubing not included