Used Laboratory Pumps For Sale

SPX Model 5040 Pump

Pusafeeder 7120 Diaphragm Metering Pump

Hydracone Diaphragm Pump HAST-C Metering Pump

Gas Compressor Duraire R-200

Haskel 2 HP Air Driven Liquid Pump

• Nominal. Ratio 32 to 1,
• Max Pressure Inlet air: 150 PSI,
• Max outlet liquid pressure : 4,800 PSI

Progressive  Cavity Pump

Seepex Progressive Cavity Pump Range BS, Size 025, Pressure Stage 12, Year of Build 1991, GPM:  0.040 to-0.400, RPM:  50-470, Lb. Ft. 9.5, PSIG 3.0, with a 1-1/2” suction and a 1” discharge. Temperature 27 - 100 C Leeson Speed Controller. Model - 04D17FZ16A. One Hp motor, Direct current permanent magnet motor: RPM 1750, KW .75, HP 1, Volts 180, Type DF, Amps 5, Continuous Duty, Max amb 40C,Frame 80/ZS56Y, Insul. Class F1, Tourque 36 inch lbs, F.F. 1.38, Encl. TEFC

Tuthill Gear Pump Hast C DDH1

Tuthill Pump Co Series D Pump Model DDH1 6TTTT2WN00000 Positive Displacement-Mag Coupled Drive. Hastelloy C276, pump size: 0.11 ml / rev, flow rate up to 6 GPH @3500 RPM, port size: 1/4" NPT. 220 volts, 3 phase motor drive, PTFE bearing material, and PTFE O-Rings

Cole Parmer Masterflex Microprocessor Pump Drive Model 7524-10.

Cole Parmer Peristaltic pump variable speed controller Model 7520-00 - Classic controller - still works great! With Cole Parmer Cartridge Pump Head 7519-00.

Labconco Peristaltic Pump model 426-2000 . 4 channel, Flow rate of .5 - 14 rpm, 2 - 1300 ml/hr

Zenith H Series Gear Pump and Controller

with Motor, ZeDRIVE Speed Controller, Stand and Gear Mount. Pacific Scientific motor 1/2 hp, 90VDC, 4.7 amps gear down to deliver a speed range of 3.2-72 rpms, pump heads can be purchased from Zenith and are easily installed

Zenith BPB Series Gear Metering Pump, Discharge Pressure to 750 to 1500 psi, Viscosity Range: 1 to 100000 cp, Pivot mount to non wetted saddle. materials of construction 400 series stainless steel, 1/2 Hp, 90 VDC, 4.7 amp Pacific Scientific motor gear down to speeds of 6 to 120 rpms, with a ZeDRIVE variable speed controller, Gear Pump Head unit is configured for a max of 0.160/0.287 cc/rev. which will deliver a flow as 3.6 to 36 cc/min,  Other pump heads are easily exchangeable to change the pump's capacity. FOR PARTS ONLY.

Outside diameter tubing size ranges from .160"-.440". Speed 10-600rpm. Flow-rate 0.6-3400 ml/min with multi-channel Cartridge Pump Model 7519-00.

Cole Parmer Masterflex Peristaltic Pump 7549-30 with Masterflex 7019-00 head.  5 amp, 50/60 Hz, 0.25 hp, 725 rpm, 90 vdc. Pump configured for single speed. Sold without speed controller.

Scilog ACCU FM40 Piston Metering Pump

Scilog ACCU  Digital Metering Pump with FMI Piston  Progressive  Cavity Pump Head, Proportional control of pumping by Analog Devices: 0 to 5 volts DC or 4 to 20 mA. with optically encoded motor, servo controlled high precision operations.  Model FM-40, 450 rpm motor,  FMI RHOCKC pump head,  Ceramic piston, Kynar body and ceramic cylinder liner, Flow rates from 0.12 to 22,5 ml/min (0.050 ml/stroke) 1//4: OD tube compression fittings.    115 volts, 50/60 Hz

Cole Parmer Peristaltic Pump Drive model 7591-50. 20-650 rpm.

Manufactured by Cole Parmer Masterflex Peristaltic Pump drive model 7552-02. 20 to 650 rpms, with Masterflex PTFE Tubing Pump head Model . PTFE pump head uses 4- or 6-mm OD rigid PTFE-tubing sets, PTFE tubing is the only wetted part, ensuring fluid purity and excellent chemical compatibility.

 Masterflex Model 7592-60 Microprocessor Pump Controller. Manufactured by Cole Parmer. 

Cole Parmer 7592-60 Digital Pump Controller

Masterflex Model 7592-60 Microprocessor Pump Controller.

Charles Austen Capex L2 Diaphragm Pump

Austen Pumps Capex L2 Diaphragm Pump for air and gas. 100/120v, 50/60 Hz, 0.55 amps vacuum pump / compressor

Barnant DL MA Piston Pump120v, 1 amp, 60 Hz

Ismatec Gear Pump with MicroHead pump head.

Compact integrated drive.

Power: 110 VAC, 60Hz

Cole Parmer Dual Diaphragm Pump model 50000-078. Polypropylene pump heads. Max psi; 125. Max feed; 2.7 gpm. Adjustable flow rate on each pump.

Watson Marlow Peristaltic Pump Model 504U

Pharmacia P-1 Peristaltic Pump. Standard tubing, 1, 2.1, or 3.1 mm ID. Flow range; 0.6 - 500 ml/hr.

Trebor Magnum 600 is a teflon air operated diaphragm pump. It has a high purity PTFE / PFA fluid path with pneumatic operation and a Pmax of 60 psi. Output 9.5 gpm. It has a 3/4 inch connection in and out.

Manufactured by Manostat -Peristaltic pump Model S

Centrifugal pump with GE motor 5KH35KG1423X. 1/4 hp, 115v, 3450 rpm. Explosion proof switch.

SciLog Accu FM-50 Piston Metering Pump

Scilog ACCU  Digital Metering Pump with FMI Piston Pump Head, Proportional control of pumping by Analog Devices: 0 to 5 volts DC or 4 to 20 mA. with optically encoded motor, servo controlled high precision operations.  Model FM-50, 3400 rpm motor,  FMI RHOCKC pump head,  Ceramic piston, Kynar body and ceramic cylinder liner, Flow rates from 5 to 170 ml/min, 1//4: OD tube compression fittings.    115 volts, 50/60 Hz

FMI model V100 rate controller allows stepless adjustment of stroke rate from 90 to 1800 strokes per minute,  features an on/off switch , forward/reverse switch, red power on light and multi-position tilt stand.

FMI QV Cavity Pump

Cavity Metering Pump QV50

Fluid Metering Inc. Cavity Metering Pump Model QV50 with Q2CSY head. 3/8" dia ceramic piston, stainless steel case, carbon liner, with 1/4 NPT feamale ports,  Flow rates from o to 108 ml/min.  Pressure from Vac t o 100 psig., 115 volts, (NEW IN BOX)

Fluid Metering Inc. Cavity Metering Pump Model RP-SY (renamed it  QSY)  with 1/4"dia ceramic pistion with Stainless Steel case with ceramic cylinder.  Flow rates from o to 23 ml/min, Vac to 100 psi, 

Eldex E-120-S Metering Pump

Eldex  Precise Metering Piston Pump,  Model E-120-S, High pressure: 1000 psi, Flow rates from 0.2 to 6 ml/min. Micrometer control. 115 volts  with 10.32 tube nut ferrule for 1/16 inch tubing.

Harvard IV Infusion Syringe Pump Model 268155920.

Lew Metering Pump C0007S

Cole Parmer Masterfex Fixed Speed Peristaltic Pump drive Model 7543-20. Various heads available.  20 rpm.

Cole Parmer Masterfex Peristaltic Pump drive Model 7543-02. Various heads available. Fixed speed, 30 rpm.

Ismatec Model MCP Peristaltic Pump, dispensing pump with interchangeable pump heads, Remote control: RS232, analog interface, Flow rates: 0.001 – 3700 ml/min Missing parts.

Parts unit only.

Cole Parmer 07569 00 Air Powered Peristaltic Pump

Cole Parmer 07569-00 Master Flex Peristaltic Pump Air Powered Drive.   Gast Model 2AM-FCC-1 air drive motor , unidirectional 60 to 600 rpms,  An air pressure regulator controls the rpms  of the pump. Flow rates: 0.036 to 2300 ml/min. The specific range is determine by the choice of short-shaft pump head and tubing size. Give us a call to help you configure this pump to satisfy you needs. 

Cole Parmer Masterflex 7553-00 Peristaltic Pump Kit

Cole Parmer Masterflex Peristaltic Pump, with Model 7553-00 drive, speed control, tubing and Masterflex heads 7018-20 (4) and 7015-20 (4).

Cole Parmer Easy-load 7518-10  Peristaltic Pump

CP Masterflex Peristaltic Pump . 20 to 650 rpms, with Easy-load head Model 7518-10.

Cole Parmer Masterflex Peristaltic Pump Model  7543- 06 Fixed Flow Console pump system.  Masterflex drive: 6 rpms at 60Hz. 115 volts, shown with Masterflex  pump head Model 7017  Requires a tube size L/S 17 calculates to 10.8 ml/min.  Give us a call so that we can help you in changing configuration of this pump to meet your needs.

Ismatec MP-13 GJ-4 Peristaltic Pump.

Pulsafeeder Pulsatron Series E Piston type Metering Pump 

• Max flow rate: 6 GPD ( 22 LPD )
• Max Pressure: 150 psi
• 115 volts

The MF 100 Oil Mist Filter removes oil mist (vapor) from the process gases exhausted from the outlet of an oil sealed pump. The filters remove both odor and oil vapor and so prevent it from reaching the atmosphere and the workplace. This filter is very efficient at 99.85% DOP test (pre-wetted filter; 99.5% with dry element). The oil level sight-glass provides easy monitoring of mist filter status. The MF100 mist filter is suitable for pumps from E2M28 to E2M80.

Milton Roy metering pump, Model P031-391TI, 0.42 gph, 110 psi max. 120v, 50/60Hz, 1.40amp.

Milton Roy Piston Pump

Zenith (Parker Hannifin), Model 60 20000 1579-4, High Pressure Gear Pumping system. speed range: 16 to 164 rpm, Set up with one controller and a series of 3 pump head assemblies (with the capacity for four heads). Kawasaki KA1-2.92-09 heads.  110v.

Masterflex L/S Easy-Load 3 Peristaltic pump head for precision tubing, 3 stainless steel rotors. Flow range: 0.06 to 2300 mL/min depending on drive rpm and tubing size. Accommodates tubing sizes:  L/S 13, 14, 16, 25, 17, 18 ,  Maximum rpms: 600

Zenith Gear Pump. BPB Series Metering Pump, rotary external spur gear, single stream, Discharge Pressure to 750 to 1500 psi, Speed:6 to 120 rpm, temp to 150 C, Flow rate: 18 to 360 cc/min, Viscosity Range: 1 to 100000 cp, Pivot mount to non wetted saddle. materials of construction 400 series stainless steel. with variable speed control not pictured.  

Fluorocarbon Coyote II Teflon Diaphragm Pump, Flow Rate 80 to 100 PSI, with air drive motor

Millipore Model XX8000000 Peristaltic Pump (6 to 600 RPM capacity). 115 Volts, 50/60 Hz. Pump heads are available

Pulsafeeder Model 25H/55H-C HB KOPkit Pump Seal kit Kit contains Diaphram, seat valve, valve ball, gasket o-ring

Cole Parmer Speed Controller for Masterlex pumps or stirrers

Ismatec Gear Pump with magnetic Drive with model 81382 MicroHead pump head

Aim Research Company StopFlow Controller Model A Pump.  THE  STOPFLOW LC-ARC SYSTEM  DETECTS 5-10 CPM RADIO ACTIVE PEAKS IN RADIO-HPLC - A NEW REVOLUTIONARY TECHNICAL BREAK-THROUGH IN RADIOCHEMICAL DETECTION (SEE APPLICATIONS). THIS IS 10-20 TIMES MORE SENSITIVE THAN THE CONVENTIONAL FLOW-THROUGH DETECTION METHOD. WITH A LC-ARC SYSTEM YOU NO LONGER NEED TO COLLECT FRACTIONS FOR OFF-LINE COUNTING FOR ACCURATE QUANTITATION OF RADIOISOTOPES. 

Eldex Metering Pump B-100-S

Eldex Precise Metering Piston Pump, Model B-100-S with Bodine Gearmotor (Volts 115; Hz 60; AMP .5; HP 1/50; Time Cont.; AMB 400C; RPM 100; Torq 8.3; Ratio 18:1), High pressure: 5000 psi,  flow rates from 0.2 to 8 ml/min, micrometer control with 10.32 tube nut ferrule for 1/16 " tubing.

Micropump Corp. Cavity Lab Pump. Pacific Scientific Permanent Magnet DC Motor, with KB Penta Power multi-drive DC Motor Speed controller, with MicroPump Corp. Pump Head. Power information: .5HP, 90VDC, 4.7A. speed 1800rpm

TAT Engineering Peristaltic Pump , 410 Series, with air motor,  flow rates from 1/4 cc to 60 gallons per hour. suction lift to 28 ft.  change capacity by changing tube siae:  1/4" ID tubing 6.0 cc/rev, 1/2" tubing  18 cc/rev

March Manufacturing Pump Model TE-5C-MD, Motor manufactured by Motor Appliance Corp., Speed 3450/2850 rpm, Power 1/4 HP, 115/230 V, 60/50 Hz, 2.6/1.3 A, Single phase, Temperature Rise 75 C.

ProMinent Fluid Controls Vario Motor Controlled Diaphragm Metering Pump, Power 115 V, 60 Hz, 100 W, Output 123 psi, 12.5 gph.

Double Diaphragm Pump, Stainless Steel, Sanitation type, on stainless steel cart

Harvard Syringe Pump Series 22 Model 55920, Infusion Only, with RS 232 port

Eastern Pulsafeeder Centrifugal Pump Centrichem Model 91 , Stainless Steel, with 1/3 hp 115/208-230 3450 rpm Motor