Pumps - Gear

Tuthill Gear Pump Hast C DDH1

Tuthill Pump Co Series D Pump Model DDH1 6TTTT2WN00000 Positive Displacement-Mag Coupled Drive. Hastelloy C276, pump size: 0.11 ml / rev, flow rate up to 6 GPH @3500 RPM, port size: 1/4" NPT. 220 volts, 3 phase motor drive, PTFE bearing material, and PTFE O-Rings

Zenith H Series Gear Pump and Controller

with Motor, ZeDRIVE Speed Controller, Stand and Gear Mount. Pacific Scientific motor 1/2 hp, 90VDC, 4.7 amps gear down to deliver a speed range of 3.2-72 rpms, pump heads can be purchased from Zenith and are easily installed

Zenith BPB Series Gear Metering Pump, Discharge Pressure to 750 to 1500 psi, Viscosity Range: 1 to 100000 cp, Pivot mount to non wetted saddle. materials of construction 400 series stainless steel, 1/2 Hp, 90 VDC, 4.7 amp Pacific Scientific motor gear down to speeds of 6 to 120 rpms, with a ZeDRIVE variable speed controller, Gear Pump Head unit is configured for a max of 0.160/0.287 cc/rev. which will deliver a flow as 3.6 to 36 cc/min,  Other pump heads are easily exchangeable to change the pump's capacity. FOR PARTS ONLY.

Ismatec Gear Pump with MicroHead pump head.

Compact integrated drive.

Power: 110 VAC, 60Hz

Zenith (Parker Hannifin), Model 60 20000 1579-4, High Pressure Gear Pumping system. speed range: 16 to 164 rpm, Set up with one controller and a series of 3 pump head assemblies (with the capacity for four heads). Kawasaki KA1-2.92-09 heads.  110v.

Zenith Gear Pump. BPB Series Metering Pump, rotary external spur gear, single stream, Discharge Pressure to 750 to 1500 psi, Speed:6 to 120 rpm, temp to 150 C, Flow rate: 18 to 360 cc/min, Viscosity Range: 1 to 100000 cp, Pivot mount to non wetted saddle. materials of construction 400 series stainless steel. with variable speed control not pictured.  

Ismatec Gear Pump with magnetic Drive with model 81382 MicroHead pump head